Latest News
15
Drilling a faucet hole in a Corian solid surface countertop is extremely easy with the correct tools. The best method is to use a hole saw. I have inc...

READ MORE...

30
Staron Solid Surface Table Fabrication from the CAD design all the way through to the finished table. I show the CNC process, inserting the inlay, att...

READ MORE...

15
Inside cove corner routing on a Corian solid surface countertop can be extremely difficult until you get the feel for it. I've had some questions abou...

READ MORE...

30
Corian Solid Surface Countertop Ramp Sink video shows the complete fabrication process to build a Corian solid surface ramp sink. From the fabrication...

READ MORE...

15
In this video I go over the pieces and parts needed to create a Corian Ramp Sink. I also show the details of the drain assemble. The drain assemble te...

READ MORE...

30
Repairing a Corian solid surface countertop can save a project from the trash bin. This repair consisted of eighty holes drilled in the incorrect loca...

READ MORE...

15
This is a quick test to see if quartz countertop material will burn. I apply heat from a torch to see what the results will be after 5 and 10 seconds....

READ MORE...

28
Corian Ramp Sink - This is a quick overview of a Corian Ramp sink. I'll show you the top details as well as how the drain is attached to the underside...

READ MORE...

15
How to sand an inside cove corner splash on Corian Solid Surface countertop using a special method to eliminate the hand sanding. Super simple to use ...

READ MORE...

30
Corian V-Groove an edge with a v-groove machine. This is a step by step instructional video on how to create a v-grooved edge on a Corian countertop. ...

READ MORE...

15
After mounting and routing a Corian seamed in sink, it then needs to be sanded to perfection. Removing the router chatter, creating a nice radius, and...

READ MORE...

30
Do Corian Countertops Burn - Using a torch, I apply direct heat to the surface of Corian Solid Surface to see if it will catch fire.   &n...

READ MORE...

15
Freehand seam a solid surface joint without using a straight edge. The process is similar to cutting a mirror seam but is cut without using a straight...

READ MORE...

28
Trimming a solid surface sink is easy with the right tooling. Using a 10 degree flush trim router bit will cut the excess solid surface countertop flu...

READ MORE...

15
This video shows the difference between using a dust collection with a 5" hand sander/grinder. I demonstrate sanding a deck seam with 40 grit sandpape...

READ MORE...

Page 1 of 30First   Previous   [1]  2  3  4  5  6  7  8  9  10  Next   Last