By Andy posted October 16, 2009 | Views: 4678
ACCU-SEAM
PRESS RELEASE
San Tan Valley, AZ, USA
October 1, 2009
ACCU-SEAM Offers Two New Seaming Systems to Fabricators of Natural, Engineered & “Green” Slab Countertops
ACCU-SEAM announced it’s offering of two new specialty seaming “systems” - designed for use on all Natural, Engineered and “Green” types of slab countertop products. Additionally, both Accu-Seam systems have had extensive testing done to be compatible for use on Solid Surface countertop materials with very positive results to date. Both systems will be sold in the United States as well as through distributors world wide.
The “VGi-1” or “Variable Geometry - Inside corner” system gives Countertop Fabricators the ability adjust their inside mitered corner seams as each individual kitchen’s geometry – or inside angles of the cabinets – vary. The unique quality the VGi-1 offers Fabricators, is the ability to perform a curved inside mitered corner seam. It eliminates the traditionally more difficult method of performing a sharp angled turn in the mitered seam. “With the VGi-1, Fabricators are able to do inside mitered corner seams much easier and faster, as we have proven with this new device, so our catch phrase is Get With THE Curve” says Kevin M. Padden, Owner of AZ School of Rock and Accu-Seam. “A second Accu-Seam system also being offered is the “S-1” that is designed to do serpentine seams in stones that have extreme color variation at the seam lines. The Serpentine seam helps to break up the visual impact of a straight seam line where “color movement” stands out more – The Serpentine seam provides camouflage” says Padden.
Padden added - “The diamond tooling that works with both systems, provides chip free, tight seams that up until now, could only be done on expensive CNC machines. Now, Fabricators that couldn’t afford a CNC machine to do their seams in the past - can provide their customers with precision seams. We’ve been teaching Fabricators to do straight seams by hand for the last two years, and recently, added the Seam Phantom to teach mechanized straight seams. Accu-Seam now offers the perfect addition to shops that may already have a Seam Phantom, and combined with Gorilla Grips to set their seams – Fabricators will have the best of all worlds.”
The Accu-Seam VGi-1 and S-1 systems will debut at “StonExpo 2009”, held at The Las Vegas Convention Center in Las Vegas, Nevada, USA - on October 22nd, 23rd & 24th, 2009. Fabricators of all types of countertop products can access more information about Accu-Seam, and see the type of seams that these new systems can produce by visiting www.accu-seam.com
For more information contact Kevin M. Padden at 480-309-9422