The FabNet® Forum
CNC Router Bit Reccomendation
Last Post 16 Oct 2018 10:51 PM by Andy Graves. 1 Replies.
AddThis - Bookmarking and Sharing Button Printer Friendly
You are not authorized to post a reply.
Author Messages
Zach Froble
New Member
New Member


Private Messenger:
Posts: 12

15 Oct 2018 05:16 PM
    Just upgraded our cnc router to a new Homag. Now I have a big enough table to nest sheets. What router bits do you guys recommend for production cutting? 

    How many of you are miter folding?

    In the past I have used Onsrud O-flute bits, but after doing some research I see guys cutting at over 500 IPM.  

    Andy Graves


    Private Messenger:
    Posts: 10031

    16 Oct 2018 10:51 PM
    I use a Belin bit 2701864 and get 200 ipm and 18,000 rpm.

    Would love to be able to cut at 500 ipm but haven't found a bit that is cost effective. Pinske-Edge has a bit that will cut at 800 ipm @ 24000 rpm but cost over $80.

    I have done miter folding on my CNC but it has to be calibrated perfect and it's pretty slow to cut. I finally got a machine that will cut a miter fold so I no longer use the CNC.
    FabNet Administrator
    Countertop Company -
    You are not authorized to post a reply.

    FabNet Forum Rules

    These Forums are dedicated to any discussion that interest the Surface Fabricator.

    Please read the following rules.  Posting, reading and participating on, you automatically agree to the following rules.  They periodically change so please read them frequently.  Because the rules change at our discretion, post at your own discretion.  The Fabricator can not control the content of the information posted.  We do not guarantee the accuracy or integrity of any information posted. 

    Under no circumstances will The Fabricator its owners, directors, and/or operators be liable in any way for any content, including, but not limited to, any errors or omissions in any content, or for any loss or damage of any kind incurred as a result of the use of any content posted, emailed or otherwise transmitted via the forum.  Full Legal 'Terms of Use'

    For the benefit of the community and to protect the integrity of the project, please observe the following posting guidelines:

    1. NO ADVERTISING or PROMOTION of products by anyone other than sponsors and advertisers of the FabNet.
    2. "FOR SALE" section is only for used equipment, closeout or advertiser and sponsor specials.
    3. Vendors and Manufacturers are prohibited from posting, commenting or discussing a competitors product in a negative way.  Negative comments toward other vendors or manufacturers will be grounds for an immediate ban from the forum.
    4. Only Advertisers/Sponsors may post their Avatar logo next to their name.  Other vendors may only use their website URL and/or their email address.
    5. Except for "FabNet Lounge", please stay on topic. Post that do not stay on topic will be removed from thread.
    6. No Profanity, Racism, or Prejudice.
    7. Site Moderators have the final word on approving/removing a thread, post or comment.
    8. Be Respectful of others.
    9. Must use a valid email address.
    10. If you want to comment or review a product you must sign the post with your real name or company name.
    11. Pricing, percentages and profit margins are prohibited and will be edited.  The remainder of the post will remain intact.

    Penalty for violating FabNet rules:

    • 1st  Incident - Verbal or email warning. (Racism will result in an automatic ban)
    • 2nd  Incident - 30 day ban from posting.
    • 3rd  Incident - 6 month ban from posting.
    • 4th  Incident - Lifetime ban